B3 GGPO® Crystal Clear Film 0.15mm
Features
★ Longer duration period
0.15mm(6mil) guarantee for 5 years
★ Specially for multi-span greenhouse
No deformation on the greenhouse, no water pockets in use
★ High Light Transmission - High Intensity
Sufficient light to promote growth and high anti-aging strength
★ Dust-proof, Algae-proof, Pesticide-proof
Effective dust and algae control, long life of pesticide resistant
Basic Performance
★ Crystal Clarity
★ High thermal insulation
★ Long-lasting anti-drip and defogging
★ Ultra-high Strength
★ Whole life span duration
Proper Installation Instructions
Demonstration of proper installation
Viewed from outside, the lettering of TTPO® film is positive-going
Viewed from outside, the lettering of TTPO® film is negative-going
Demonstration of wrong installation
Viewed from outside, the lettering of TTPO® film is negative-going
Viewed from outside, the lettering of TTPO® film is positive-going
Film Selection and Installation Guidelines
1. Preferably PO crystal clear film for areas with large temperature difference between day and night and short light hours.
2. In areas with very strong sunlight, PO diffused film with high diffusion rate is strongly recommended;
3. The function of two sides of the film is different,please install the film according to the prints and labels.;
4. Avoiding thermal expansion and contraction, install the greenhouse in the morning or evening, tighten the film in winter,and loosen it in summer
5. Avoid dragging and rubbing in the process of installation, film-locking should be moderate,not too tight or loose, keeping film surface flat
6. Store the film in a dry shading place within 6 months before installing.
7. Greenhouse frame should be spray white paint or make the rust-proof treatment,and film contact with the arch rod must not have burrs
8. In case of film breakage, use film tape to repair it promptly.
9. Avoid frequent pesticide spraying and sulfur fumigation, and prohibit long-term contact with rubber or PVC products
TTPO® Clear Film | |||||||
Thickness (mm) |
Light Transmission (%) |
Guarantee | Tensile Strength (Vertical/horizontal) (Mpa) |
Elongation at Break (Vertical/horizontal) (%) |
Tear Resistance (Vertical/horizontal) (kN/m) |
Width (m) |
|
0.13 | 90 | 48 months | 32/35 | 700/800 | 110 /120 | 1~16 | |
0.15 | 90 | 60 months | 26/30 | 700/800 | 100/110 | 1~16 | |
TTPO® Diffused Film | |||||||
Thickness (mm) |
Light Transmission (%) |
Diffusion Rate (%) |
Guarantee | Tensile Strength (Vertical/horizontal) (Mpa) |
Elongation at Break (Vertical/horizontal) (%) |
Tear Resistance (Vertical/horizontal) (kN/m) |
Width (m) |
0.13 | 90 | ≥60 | 48 months | 32 /35 | 700/800 | 110 /120 | 1~16 |
0.15 | 90 | ≥70 | 60 months | 26/30 | 700/800 | 100/110 | 1~16 |