Greenhouse Diffused Film- 0.20mm, 8mi
Features
★ Significant Yield Increase
Diffusion film light is thrown to the upper ,middle and lower part of the plant to make photosynthesis more adequate and achieve yield increase.
★ Better Coloring
Diffused film with higher light transmission is good for crop photosynthesis, with no reduction in energy and more uniform coloring
★ High Light Transmittance
The combination of the raw material method and the additive method allows the film to produce more diffused light without reducing the light transmission.
★ Crop-friendly
Diffused effect is noticeable, so that the light is more uniform, not directly on the plant, effectively preventing crop burn.
Proper Installation Instructions
Demonstration of proper installation
Viewed from outside, the lettering of TOYOTANI® film is positive-going
Viewed from outside, the lettering of TOYOTANI® film is negative-going
Demonstration of wrong installation
Viewed from outside, the lettering of TOYOTANI® film is negative-going
Viewed from outside, the lettering of TOYOTANI® film is positive-going
Film Selection and Installation Guidelines
1. The area, with big temperature difference between day and night, is suitable for the high-thermicity and high-transmission film.
2. The area with strong sunshine is suitable for the high diffusion film.
3. The function of two sides of the film is not the same，please install the film according to the prints and labels.
4. Avoiding thermal expansion and contraction, install the greenhouse in the morning or evening, tighten the film in winter，and loosen it in summer.
5. Do not spray the chemical onto the covering，and also do not use the Sulfur Burner inside the poly greenhouse，because this will accelerate the film aging
Avoid directly contact with the crops, equipment of irrigation or heater, etc.
6. Store the film in a cool shading place within 6 months before installing.
| Thickness （mm） |
Guarantee | Tensile Strength (Vertical/horizontal) （Mpa） |
Elongation at Break (Vertical/horizontal) （%） |
Tear Resistance (Vertical/horizontal) （kN/m） |
Width （m） |
| 0.13 | 48 | 26/28 | 550/650 | 90/100 | 0-18 |
| Note: 0.5 integer multiples of the width can be cut. | |||||
